📥 Free Firmware for C Idea Smart CM525 Tablet (MT6580) 📥
🔹 Firmware Details:
✅ Device Model: C Idea Smart CM525
✅ Chipset: MediaTek MT6580
✅ Software ID (SWID): mt6580_cidea_cm525_osv7.0_tw_mt8321_1g+8g_sj_4g+64g_er88577b_boe_insell_cam2365+5005_20230529_nrd90m_aeon6580_we_n
✅ Firmware Version: Android 7.0 (Nougat)
✅ Storage Config: 1GB RAM + 8GB Internal / 4GB + 64GB Expandable
✅ Camera: 2MP Front + 5MP Rear
✅ Firmware Type: Stock ROM 🏆
✅ Tag: cidea-cm525-k7321
🎯 Why Flash This Firmware?
🔹 Fix Boot Issues (Stuck on Logo, Bootloop)
🔹 Unbrick Your Device (Dead Boot Fix)
🔹 Remove Virus/Malware 🛡️
🔹 Restore Stock Performance 🚀
🔹 Fix Software Glitches & Bugs
🔹 Bypass FRP (Factory Reset Protection)
🛠️ Required Tools & Files
✔ Firmware File: (Download Link)
✔ SP Flash Tool (Latest Version)
✔ MediaTek USB Drivers
✔ MTK Scatter File (Included in Firmware)
✔ A Good USB Cable & PC 💻
🔥 How to Flash C Idea CM525 (MT6580) Firmware 🔥
⚠️ Important Warning:
Before flashing, always take a full backup of your device! This process will erase all data.
Step-by-Step Flashing Guide
1️⃣ Install MediaTek USB Drivers
📌 Download & install MTK USB Drivers to ensure your device is recognized by the PC.
2️⃣ Extract the Firmware & SP Flash Tool
📁 Unzip the downloaded firmware and SP Flash Tool into separate folders.
3️⃣ Open SP Flash Tool
📌 Run flash_tool.exe as Administrator.
4️⃣ Load Scatter File
📑 Click on Scatter-loading file and select the MT6580_Android_scatter.txt from the firmware folder.
5️⃣ Select Download Mode
✅ Set the Download Only option (For standard flashing)
✅ Choose Firmware Upgrade (If you need a full system restore)
6️⃣ Connect the Device
🔌 Turn off the tablet, press Volume Down (or Up) and connect it via USB.
7️⃣ Start Flashing
▶ Click Download in SP Flash Tool and wait for the process to complete.
8️⃣ Wait for Flashing to Finish
✔️ A green “Download OK” message will appear. 🎉
9️⃣ Reboot & Setup
🔄 Disconnect the device and power it on. Initial boot may take a few minutes.
🆘 Troubleshooting
❌ SP Flash Tool Not Detecting Device?
✔ Try reinstalling MTK USB Drivers & changing the USB cable/port.
❌ Stuck on Bootloop After Flashing?
✔ Perform a Factory Reset from Recovery Mode.
❌ Error: PMT Changed for the ROM?
✔ Select Format + Download in SP Flash Tool.
