XTOUCH A5 Firmware -flash file

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices – 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
Enter SVC …
Waiting Device …
Check SVC …
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : XTOUCH-A5-30112018-V5.0
MemoryInfo : EMMC : 16 GB ; DRAM : 1 GB

Platform Version: MOCORTM_18A_RLS2_W18.40.3_P1_Debug
Project Version: sharkl2_pub
BASE Version: FM_BASE_18A_RLS2_W18.40.3_P1
HW Version: sc9850_modem

MODEM TAG : MOCORTM_18A_RLS2_W18.40.3_P1_Debug_FM_BASE_18A_RLS2_W18.40.3_P1_sc9850_modem_sharkl2_pub

PSN1 : 78288452443476

NVMng : SecurityInfo
IMEI[1] :
IMEI[2] :
WIFIMAC : 000000000000
BT_MAC : 4045DA852AE6
SEC : SLS:0, SKS:0, SKV:4

Done!
Elapsed: 00:00:51

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
ProtoEx : Forced FlashWrite enabled!
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : XTOUCH-A5-30112018-V5.0
Ver. Incmt : 52410
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 27.12.2018
Product Model : XTOUCH_A5
Product Brand : XTOUCH
Product Name : A5
Product Device : A5
Product Manfct : XTOUCH
Product Info : sp9850ka_1h10_go
Product Model : A5
Product Board : Colors
Board Platform : sp9850ka

NVMng : SecurityInfo
IMEI[1] :
IMEI[2] :
IMEI[3] :
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18A_RLS2_W18.40.3_P1_Debug
Project Version: sharkl2_pub
BASE Version: FM_BASE_18A_RLS2_W18.40.3_P1
HW Version: sc9850_modem

MODEM TAG : MOCORTM_18A_RLS2_W18.40.3_P1_Debug_FM_BASE_18A_RLS2_W18.40.3_P1_sc9850_modem_sharkl2_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

– > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:39

Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
ProtoEx : Forced FlashWrite enabled!
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : XTOUCH-A5-30112018-V5.0
Ver. Incmt : 52410
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 27.12.2018
Product Model : XTOUCH_A5
Product Brand : XTOUCH
Product Name : A5
Product Device : A5
Product Manfct : XTOUCH
Product Info : sp9850ka_1h10_go
Product Model : A5
Product Board : Colors
Board Platform : sp9850ka

AndroidVer : 8
VlnrLevel : 0x02

SP9850KA__XTOUCH__A5__8.1.0__XTOUCH-A5-30112018-V5.0__OPM2.171019.012__sp9850ka_1h10_go

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : pm_sys.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : phase.cfg
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
ExtSparse : Compression ratio : 82%
Read : vendor.img
ExtSparse : Compression ratio : 51%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 42%
Read : u-boot-spl.bin

Firmware size : 0x5FC45354 ( 1.50 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:12:04

Need Cm2sp2 to flash this firmware..

Download

+9779816001600 (paid firmware do not message me if you don’t want to paid )

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *


Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock